ATF advance users need help here..

I have here a dead Cherry mobile Flare S100. Tried Jtag using ATF. Pinouts are 100% fine but cant detect phone..

logs are here..

ATF JTAG v1.0.15.8544 (6/17/2015)
Default language ID 0x0409, LR 14
JTAG Interface Connected, S/N 0x8F480E0D
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 11/26/2013 11:00:00 AM

================================================== ========
Phone Type : Cherry Mobile Flare (S100)
CPU Type : Qualcomm MSM8225
Storage TYpe : eMMC 4GB
Boot Package : Full Factory Restore
Android Version: 4.1.2 (Jelly Bean)
Kernel Version : 3.4.0
Build Number : TBW592250_8572_V006045
================================================== ========

1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect USB Cable to Phone
4. Connect RJ-45 JTAG Cable to ATF Box
5. Select the Correct Phone Type
6. Use RESET JTAG button to check the JTAG Connection
7. Click RESTORE BOOT button to Start Boot Repairs
8. Full Factory Restore takes 40 minutes to Finish
----------------------------------------------------------

Resetting and Exploring JTAG chain...No Devices found in Chain!
Resetting and Exploring JTAG chain...No Devices found in Chain!

Any help is very much appreciated. Thanks...

This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.

ATF advance users need help here..