Writing Firmware Failed

lundi 9 novembre 2015

Good Morning All....Please i need help.am trying to flash SM-G318H,but at the end of the flashing process i will get this message ''writing firmware failed'..

what could be the problem?

Welcome to Octoplus/Octopus Box Samsung software version 2.1.0
Selected firmware file: G318HXCU0AOI2_G318HROM0AOI1
_G318HXCU0AOI1_HOME.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G318H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing system section...
system section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing WDSP section...
WDSP section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing Firmware Failed

This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.



Writing Firmware Failed

0 commentaires:

Enregistrer un commentaire

 

Lorem

Ipsum

Dolor