repair dead boot sgh-i527 done but phone still dead

EasyJtag Suite ver.: 2.0.5.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition.
Successfully connected to box on COM29
Box S/N: 1313031079C084EF, ,FW Ver.: 01.52
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AAEC-9CD5 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [SAMS] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [JTAG] : ACTIVATED
Loading D:\walid-septiembre\Easyjtag\SGH-I527\Samsung_SGH-i527_UCUAMK2_16gb_model_boot_v1_00.rcp
Loading repair file: 'D:\walid-septiembre\Easyjtag\SGH-I527\Samsung_SGH-i527_UCUAMK2_16gb_model_boot_v1_00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: SGH-i527, Ver.: 1.00
Repair file options. : NONE
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 2.0.5.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG SGH-i527 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: 1313031079C084EF ,FW Ver.: 01.52
Connecting to Target...
JTAG device: MSM8930AB.
CPU IDCODE : 0x4F1F0F0F Mfg.: 0x787, Part: 0xf1f0, Ver.: 0x4
CPU Manufacturer: Samsung , CPU Name: ARM7GEN
JTAG device: MSM8930AB.
CPU IDCODE : 0x308930E1 Mfg.: 0x070, Part: 0x0893, Ver.: 0x3
CPU Manufacturer: QUALCOMM , CPU Name: Unknown
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000011 Name : 016G92 Size : 14.7 G , (30777344) Blocks
EMMC #1 : ID : 0x00000011 Name : 016G92 Size : 4.0 M , (8192) Blocks
eMMC flash device(s) found, Device ID : 0x00110000
NAND Writing GPT, PIT, MD5...
eMMC Write OK! Elapsed time: 8.384480s (244.261 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time: 1.305075s (98.079 KiB/s)
NAND Writing SBL2...
eMMC Write OK! Elapsed time: 2.032116s (125.977 KiB/s)
NAND Writing SBL3...
eMMC Write OK! Elapsed time: 4.406252s (116.199 KiB/s)
NAND Writing ABOOT...
eMMC Write OK! Elapsed time: 15.180869s (134.907 KiB/s)
NAND Writing RPM...
eMMC Write OK! Elapsed time: 2.964169s (172.730 KiB/s)
NAND Writing TZ...
eMMC Write OK! Elapsed time: 3.302189s (155.049 KiB/s)
All Done.

This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.

repair dead boot sgh-i527 done but phone still dead